Adjusting The Audio Signal By Means Of The Dial Tone - Sennheiser DW Series Setup Manual

Testing the headset system and the sound quality

Adjusting the audio signal by means of the dial tone

1 Put on the headset and press the Phone button
2 Press the Link button on the headset. The Link LED
3 Lift the handset. You hear a dial tone.
4 Set the ABC switch to the position A,
dial tone in the headset.
1
3
on the base station.
lights up blue.
B or C so that you can hear a clear
2
4
DW Series – Setup Guide | 15