Connecting The Base Station To A Computer; Securing The Connected Cables - Sennheiser DW Series Setup Manual

Setting up the base station
10 | DW Series – Setup Guide

Connecting the base station to a computer

Connect the USB cable to the
station and to a USB socket of your computer. The operating system
detects the USB audio device "Sennheiser DECT" and installs the neces-
sary drivers.
Sennheiser PC software
The free Sennheiser PC software allows you to add value to your
Sennheiser products. The Sennheiser Updater, for example, facilitates easy
updating of products with new software. For more information, visit our
website at www.sennheiser.com/cco/software.

Securing the connected cables

1 Replace the cover to the rear of the base station.
2 Tilt the cover upwards until it locks into place with an audible click.
1
PC socket (marked orange) on the base
2