Take Off The Top Printer For Service; Mount The Top Printer After Service - Epson D-Jet 300 Service Manual

Reconnect the USB camera cable and the power
connector to the LED light.
1.4

Take Off the Top Printer for Service

Read the chapter before "1.2 Take off the Bottom
Printer for Service".
The procedure is the same:
- Unplug USB, Ethernet and power cable at
the printer side
- Unplug the LED power and the USB cable
from the camera
- Below the printer, take off both lock bolts
which are fixing the printer to the support
plates
- Take the printer from the frame
1.5

Mount the Top Printer after Service

Read the chapter before "1.3 Mount the Bottom
Printer after Service". There is no additional work to
do.
Service Manual – Service Epson Printer
Epson Printer Service on Site
Take Off the Top Printer for Service
1
1-9