Function Display - Garmin GTX 327 Installation Manual

3.2.2 Function Display

PRESSURE ALT
FLIGHT TIME
COUNT UP TIMER
COUNT DOWN TIMER
CONTRAST
DISPLAY
Page 22
Rev J
Displays the altitude data supplied to the GTX 327 in feet, hundreds of
feet (i.e., flight level), or meters, depending on configuration.
Displays the Flight Time, controlled by the START/STOP key or by one
of four airborne sources (squat switch, GPS ground speed recognition,
airdata airspeed recognition or altitude increase) as configured during
installation. The timer begins when the GTX 327 determines that the
aircraft is airborne.
Controlled by START/STOP and CLR keys.
Controlled by START/STOP, CLR, and CRSR keys. The initial
Count Down Time is entered with the 0 – 9 keys.
This page is only displayed if manual contrast mode is selected in
Configuration Mode. Contrast is controlled by the 8 and 9 keys .
This page is only displayed if manual backlighting mode is selected in
Configuration Mode. Backlighting is controlled by the 8 and 9 keys.
GTX 327 Installation Manual
190-00187-02