Basic Operations - Hitachi CP-X955W Operating Manual

12
Downloaded from www.Manualslib.com

Basic operations

To project the picture
5
1
Turn the MAIN POWER switch of the projector on. [
• The ON indicator will light up orange.
2
Press the STANDBY/ON button.
• The ON indicator blinks (green) and then lights (green).
• The ON indicator will blink green during warm-up and light up.
3
Turn the lens cover lever down.
• Lens cover opens.
4
Adjust the picture size using the ZOOM button.
5
Adjust the focus using the FOCUS button.
(1) Press the FOCUS button. The on-screen display shown on the right appears.
(2) Adjust the focus so that the picture is clear using the FOCUS button.
(3) When any other button is pressed, "FOCUS" on the screen will be turned off.
6
Power on all connected equipment.
The method of connecting various equipment, see on the page 19 ∼ 27.
7
Press the INPUT button or the INPUT SELECT (VIDEO or
RGB) button to select the source of the signal
to be projected on the screen.
• The selected signal input is displayed at the bottom right of the screen.
manuals search engine
4 7 2 2
4
7
1
3
STANDBY/ON MUTE
FOCUS ZOOM VOLUME
POSITION ON LASER
5
RESET RIGHT
MENU ON MOUSE ON
BLANK TIMER
RGB 1/2 VIDEO 1/2
INPUT
I : ON]
+++ +++
FOCUS
Example on-screen display
RGB 1