Basic Operations - Hitachi CP-X955E Operating Manual

II
÷ II
Basic operations
To project the picture I
54 72 2_
3
1
f
7_
_5
4
/ Turn the MAIN POWER switch of the projector on. [
I
: ON]
• The ON indicator will light up orange.
÷ 2 Press the STANDBY/ON button. ÷
• The ON indicator blinks (green) and then lights (green).
• The ON indicator will blink green during warm-up and light up.
12
_=_ Turn the lens cover lever down.
• Lens cover opens.
4 Adjust the picture size using the ZOOM button.
5
Adjust the focus using the FOCUS button.
(1) Press the FOCUS button. The on-screen display shown on the right appears.
(2) Adjust the focus so that the picture is clear using the FOCUS button. + + +FOCUS+ + +
(3) When any other button is pressed, "FOCUS" on the screen will be turned off.
Power on all connected equipment.
The method of connecting various equipment, see on the page 19 - 27.
7
Press the INPUT button or the INPUT SELECT (VIDEO or
RGB) button to select the source of the signal
to be projected on the screen. Example
on-screen
display
• The selected signal input is displayed at the bottom right of the screen.
RGB 1
II ÷ II