Omit Zones (User Level 3 And Above); Purpose; Selecting Omit Zones; Viewing Eligible Zones - Honeywell Galaxy 8 User Manual

Omit Zones (User Level 3 And Above)

PIN + ent
0 = OMIT ONES
[ent] to select
ent
1003 A1 INTRUDER
#=OMIT ENT=SET
>A
1004 SECURITY
#=OMIT ENT=SET
#
1004 SECURITY
OMITTED ENT=SET
ent
1 OMITTED 120
esc
ONES OMITTED
14:35 TUE 17 DEC

Purpose

This option allows the user to omit zones before setting the system.
Zones must be eligible for omission otherwise they will not be displayed.
Note: Zones remain omitted for one set period only.

Selecting Omit Zones

Enter the QUICK MENU. The 0=OMIT ZONES option is displayed.
Press the ent key to select this option.

Viewing Eligible Zones

When the Omit Zones option is selected the first zone eligible for omis-
sion is displayed. The eligible zones can be viewed by pressing the A>
or <B keys. The zones eligible for omission can be rapidly viewed by
holding down either of these keys.

Omitting Zones

Once the zone to be omitted is shown on the display, press the # key.
The display indicates that the zone is omitted. A> and <B keys can
then be used to select other zones to be omitted using the same method.
Note: A zone is omitted from the system as soon as the # key is
pressed. The system does not have to be set.

Setting With Omitted Zones

When the list of omitted zones is complete the setting routine is started
by pressing the ent key. The system starts to set and the display indicates
how many zones have been omitted. Alternatively the esc key can be
used to return to the menu options. Zones that have been omitted remain
omitted even after using the esc key.
Note: All zones omitted are recorded in the log against the user.
Galaxy 512
The Galaxy 512 will only allow a single eligible zone to be omitted from
the system. Once a zone has been omitted, it is not possible to view
other zones with the omit attribute enabled, until the omitted zone is re-
instated (either automatically or manually).
Vibration Zones (504 & 512 Only)
If the omitted zone is a vibration zone, then all zones of this type (in
all groups) will be block omitted. The vibration zones remain
omitted until manually reinstated. Unsetting the system does not
reinstate vibration detectors.
9