Front Operator's Panel - Lenovo Type 8332 User Manual

Connectors
The following connectors are located on the server board I/O panel:
v PS2 mouse port
v PS2 keyboard port
v Serial port
v Video port
v Two RJ-45 ports - NICs 1 and 2 (1Gb each)
v Four USB ports: 0, 1, 2, and 3
Server board LEDs
Status LEDs: Diagnostic LEDs are located on the server board I/O panel to assist
in identifying failed and failing components. See "Server board LEDs" on page 25
for a summary of status LED states.
NIC LEDs: The NIC LEDs at the right and left of each NIC port provide
information on NIC status. See "I/O panel NIC LEDs" on page 25 for a summary
of NIC LED states.

Front operator's panel

A front operator's panel, consisting of a USB port, three LEDs and three
push-button switches, are located on the front of the enclosure.
Note: The front operator's panel is an integral part of the enclosure assembly and
Figure 8. Front operator's panel components
1 PS2 mouse port
2 System status LED
3 MSB (POST LED)
4 Bit 1 (POST LED)
5 Serial port
6 NIC port 1 (1 Gb)
7 NIC port 2 (1 Gb)
8 PS2 keyboard
is not field replaceable.
1 USB port
2 Unit fault LED
9 Bit 2 (POST LED)
10 LSB (POST LED)
11 Video port
12 USB port 2
13 USB port 3
14 USB port 1
15 USB port 0
5 Power active LED
6 ID LED
Chapter 2. Features
7