Using Dtv Menu - JVC HD-ILA HD-65DS8DDU Instructions Manual

Using DTV menu

Digital channels original function and setting can be selected from the DTV menu.
Switch to digital channels
1
Display the menu bar
2
Select "DTV"
3
Select "Setup"
4
Timer
Edit PR
Configuration
Setup
Installation
To the previous
Select an item
5
screen
Setup
Exit
E.g. "Antenna Power"
DTV menu cannot
Change setting
6
be operated with the
front buttons.
Antenna Power
E.g. "Antenna Power"
Finish
7
1 select
DTV
2 next
1 select
DTV Menu
2 next
select
14:00 05/05/2006
Digital Audio Output PCM
Banner Duration 2 sec
Receiver Upgrade Auto
Common Interface No CI Module
Antenna Power Off
Off
Menu Item
Timer
Edit PR
Country
Time Zone
Menu Language
Audio Language
Subtitle Language
Teletext Language
EPG Language
Enter PIN Code
Favourite Mode
Maturity Rating
Digital Audio Output
Banner Duration
Receiver Upgrade
Common Interface
Antenna Power
Service Scan
Signal Check
Factory Settings
select
When watching digital channels or changing DTV menu settings, it may be necessary for you to
enter a PIN code.
Once a PIN code has been entered, there is no need to enter it again until the TV is turned off.
The default PIN code is "0000".
You can set your own PIN code.
Adjustments / Configurations
Reserve a programme to record / watch (P. 18)
Edit / Delete / Lock registered digital channels or add them to favourites
(P. 28)
Select the country of installation (P. 25)
Select the time zone when the clock is off time
"Set the clock to the right time" (P.33)
Select a language for on-screen menus (P. 25)
Select a default language for audio (P. 25)
Select a default language for subtitle (P. 25)
Select a default language for teletext (P. 25)
Select the default language for programme name and programme
information (P.25)
Change PIN code (P. 25)
Enable your favourite channels (P. 25)
Restrict programmes according to the age (P. 25)
When the Dolby Digital signal is received, you can select to output the
signal from the DIGITAL AUDIO OUTPUT terminal (P. 26)
Select the display time for channel information (2 sec / 5 sec / 8 sec)
Upgrade your tuner software as newer versions becomes available (P. 26)
Set Conditional Access Module (P. 26)
Power supply for the indoor aerial (P. 26)
Register channels (P. 27)
Check the broadcast signal (P. 27)
Initialise the DTV settings (P. 27)
When entering the PIN code
"Enter PIN Code" (P. 25)
23