Setting The Nature And Reduction Mode; Nature Mode; Reduction Mode; Diagram Of Speed Cycle Settings - Kambrook Arctic KFA837 Instruction Booklet

Using Your Kambrook Tower Fan
Setting the Nature and

Reduction Mode

Your tower fan has a NATURE
and REDUCTION
Both the NATURE and REDUCTION
modes can be used on any fan
speed. The LED screen will indicate
what mode the fan has been set in.

Nature Mode

The NATURE mode stimulates the
natural rise and fall of the wind
over time.
At any fan speed setting, pressing the
MODE button once will turn the tower
fan into NATURE mode.
To turn the NATURE mode OFF, press
the MODE button twice, the fan will
now be in NORMAL operation mode.

Diagram of speed cycle settings:

NATURE:
Random speed cycles
Speed (LOW,MED,HIGH)
speed
10
setting.
continued
Reduction mode
The REDUCTION mode automatically
decreases the fan speed over time.
The REDUCTION mode only applies in
the MED or HIGH speed settings.
Once a fan speed setting is selected,
press the MODE button twice will turn
the tower fan into REDUCTION mode.
After 30 minutes, the selected setting
will drop to the next lowest setting.
For example if the fan speed is set
at MEDIUM, after 30 minutes it will
drop down to LOW until the unit is
turned off.
To turn the REDUCTION mode off,
press the MODE button once, the
fan will now be in NORMAL
operation mode.
When REDUCTION mode is selected
the display panel will automatically
switch off after 30 seconds. Press any
button on the control panel to turn
the display on again. This will NOT
turn the tower fan off.
REDUCTION:
Speed steps down every 30 minutes for MED and HIGH
settings.
Pre-select speed
variation
speed
variation
speed
Pre-select speed
variation
speed
variation
speed
variation speed
(MED)
(HIGH)