Turning Your Tower Fan On - Kambrook Arctic KFA837 Instruction Booklet

5. Once base stand is aligned with
the tower fan body, secure the
base stand to the tower body
with the four fastening screws
(see Fig.4).
6. Return the tower fan to its upright
position; it is now ready for use.
WARnInG: Do not operate
the tower fan without the
base stand fitted.

Turning Your Tower Fan On

To turn the tower fan on, plug the
power cord into a 230V or 240V
electrical outlet and switch on. Be
sure the plug fits tightly as a loose fit
will cause overheating and damage
the plug.
Once the power outlet is switched
on, this will automatically allow the
LED screen to display to current
room temperature.
To start the tower fan, turn the tower
fan on by pressing the 'POWER'
button once; the unit will be in
NORMAL fan mode.
Setting the Fan Speed
The tower fan has three fan speed
settings; LOW
HIGH
Pressing the 'SPEED' button once
will set the tower fan into LOW
speed setting.
Pressing the 'SPEED' button
twice will set the tower fan into
Medium
Pressing the 'SPEED' button three
times will set the tower fan into
HIGH
Fig. 4
nOTE: The SPEED indicator bar
on the control panel will flash
continuously during these cycles.
To turn the tower fan OFF, press the
'POWER' button and turn off at the
power outlet and remove the plug
from the power outlet.
, MEDIUM
.
speed setting.
speed setting.
and
9