Page 2
In the event that you need some assistance with your Kambrook appliance, please contact our Customer Service Department on 1300 139 798 (Australia) or 09 271 3980 (New Zealand). Alternatively, visit us on our website at www.kambrook.com.au...
Page 3
Contents Kambrook Recommends Safety First Your Kambrook Essentials 550W Food Processor Assembly and Operation of Your Food Processor Blade Operating Guide Maintaining, Cleaning and Storage for Your Kambrook Food Processor Recipes KFP400_410_IB_C12.indd 3 13/12/12 5:26 PM...
Page 4
IMPORTANT: Please retain your instruction book for future use. At Kambrook, we believe that safe performance is the first priority in any consumer product, so that you, our valued customer can confidently use and trust our products. We ask that any electrical appliance that you use be operated in a sensible fashion with due care and attention placed on the following important operating instructions.
Page 5
• Do not place hands or fingers into the • If the Food Processor is operated processor bowl of the Food Processor continuously for too long, it should unless the motor, processing blade be allowed to rest for 25–30 minutes and reversible disc have come to a before recommencing.
Return the entire appliance to the nearest authorised Kambrook CAUTION: The processing Service Centre for examination blade and reversible and/or repair.
Page 7
Your Kambrook Essentials 550W Food Processor Control Switch – with ‘OFF’, Food pusher and removable inner single speed ‘ON’ function 150ml measuring cup – fits into plus ‘PULSE’ function for fast the feed chute for safe adding and simple processing control of foods onto the processor bowl.
Assembly & Operation of Your Food Processor Before First Use 2. The processor lid is correctly aligned and locked into place Before first use remove and safely (see Fig.2, Fig.4) discard any promotional labels and wash the food processor bowl , processor lid, processing blade and reversible disc in warm, soapy water.
Page 9
Assembly & Operation of Your Food Processor continued 5. To begin operation, press the WARNING: All blades must control switch button to either be handled carefully as the ‘ON’ or ‘PULSE’ position, they are sharp. depending on your requirements. For short bursts of power, use the ‘PULSE’...
Assembly & Operation of Your Food Processor continued NOTE: The food processor will NOTE: Ensure that the unit is in not operate unless the processor the ‘OFF’ position, and switched bowl and processor lid are off and unplugged at the power correctly locked into position.
Page 11
In the event that the food processor starts without the processor bowl and lid correctly locked into position, immediately disconnect at the power outlet and return to your local Kambrook Service Centre for examination. KFP400_410_IB_C12.indd 11 13/12/12 5:26 PM...
Page 12
Blade Operating Guide The Stainless Steel Processing Blade The cutting edge of this blade is extremely sharp, it should only ever be held by the central plastic spindle. ALWAYS store the blade with the protective cover provided. Chopping Use Processing Blade Ingredients Procedure Onions, Vegetables, Fruits...
Page 13
Pureeing Use Processing Blade Ingredients Procedure Cooked Soups, Sauces Place up to 4 cups of mixture in the processor bowl (1Litre or less) and process, until desired consistency is reached. Dips, Spreads Place ingredients in the processor bowl and process. If some ingredients are to remain in pieces, add them last and mix in using the ‘PULSE’...
Page 14
The Stainless Steel Reversible Disc Slicing Use Reversible Disc – Slice Ingredients Procedure Onions Peel the onions and halve if too large to fit into the feed chute. Place the onions in the feed chute, cut edge down. Process, exerting firm pressure on the food pusher.
Page 15
Blade Operating Guide continued The Stainless Steel Reversible Disc Shredding Use Reversible Disc – Shred Ingredients Procedure Onions and Potatoes Pack into the feed chute and process using firm pressure on the food pusher. Peel and cut into pieces if necessary to fit the feed chute. Prepare the vegetables and pack into the feed Carrots, Zucchini and chute.
Page 16
Maintaining, Cleaning and Storage for Your Kambrook Food Processor Always switch the food processor Before storage, thoroughly wash off at the power outlet and then and dry all removable parts. unplug before disassembling Assemble the food processor and any parts.
Page 24
Kambrook - Australia Kambrook - New Zealand Building 2, Port Air Industrial Estate Private Bag 94411 1A Hale Street Botany, Manukau Botany NSW 2019 Auckland 2163 Australia New Zealand Customer Service Line 1300 139 798 Customer Service Line/ Customer Service Fax 1800 621 337...
Need help?
Do you have a question about the Essentials KFP400 and is the answer not in the manual?
Questions and answers