Installation Tips; Connection Diagram - Audiopipe DJAP-612PB User Manual

4. Installation Tips

1- Speakers should be placed in a position that allows for unobstructe sound projection. In many instances is beneficial for
speakers to be elevated on tripod stands to achieve maximum dispersion and reach.
2- Use professional advice or service when hanging and installing speakers. Please take precautions to secure them to prevent
them from falling and hurting someone. Care should be taken as to not damage the cabinet or its components. Please comply
with all pertinent Regulations.
3- Use quality cables. Using quality cables will ensure the best possible sound.
4- For best results match the speakers to a good amplifier that matches the wattage and impedance of your speakers.
Proper amplification power results in good quality audio and longer component life. Check out the power requirement for your
cabinet.
5- Avoid pointing a microphone directly at an amplified speaker doing so, could cause feedback possibly damaging speaker
components and your hearing.

5. Connection Diagram

MATCHING WITH PASSIVE SPEAKER
Make all initial connections with all the equipment powered off, and make sure that the main volume controls are turned down
completely.
1) With a high quality signal line connect a CD player or other players to the active speaker DJAP.
2) Using the speaker cable connect the INPUT of the passive speaker to the OUTPUT of DJAP.
3) Complete other connections as illustrated. And then turn the power on.
4) Turn up the volume controls of the DJAP to about 70%.
5) Use the mixer PFL function of the DJAP to get the proper input level, and adjust the Main Mix Level control to manipulate
the output level.
10
OF F
DJAP-61PB DJAP-615P
Enjoy the sound!
Speaker
Cable
PASSIVE SPEAKER