Warning/Alarm Indicators - Panasonic Palmcorder PV-GS120 Operating Instructions Manual

Warning/Alarm Indicators

If any one of the following indicators lights up or
flashes, please check the condition of the
Camcorder.
3DEW (DEW DETECT/EJECT TAPE):
Condensation has occurred.
Y (CHECK REC TAB):
The accidental erasure prevention switch
on the inserted Cassette is open (that is, set
to [SAVE]).
You are attempting Audio dubbing or Digital
dubbing on a Tape while setting the
accidental erasure prevention switch to
[SAVE].
Y (TAPE NOT INSERTED):
No Cassette in inserted.
6 (LOW BATTERY):
The Battery is low. Recharge it.
0: The built-in battery is low.
: (NEED HEAD CLEANING):
The video heads are dirty.
2END (TAPE END):
The Tape came to an end during recording.
REMOTE (CHECK REMOTE MODE):
Wrong Remote Controller Mode has been
selected.
-16-
UNPLAYABLE TAPE
(OTHER FORMAT):
You are attempting to play back a tape
section that has been recorded with a
different TV system.
UNABLE TO A.DUB
(LP RECORDED):
Because the original recording was done in
LP Mode, audio dubbing cannot be
performed.
INCOMPATIBLE TAPE:
This cassette is incompatible.
PUSH THE RESET SWITCH:
Irregular mechanism is detected. Press the
[RESET] Button (
-13-
problem.
CARD FULL:
Card does not have sufficient memory
remaining.
Select Picture/MPEG4 Playback Mode and
delete unnecessary files. (MPEG4 Playback
Mode on PV-GS200 only)
NO CARD:
Card is not inserted.
NO DATA:
There are no recorded files on the Card.
UNPLAYABLE CARD:
You are attempting to play back data which
is not compatible with this Camcorder.
Others
-79-
-18-
-16-
-26-
-79-
). This may solve the
-70-
CARD ERROR:
The Card is not compatible with this
Camcorder.
COPY INHIBITED:
Because the medium is protected by a copy
guard, images cannot be recorded
correctly.
INCORRECT OPERATION:
The Recording Start/Stop Button was
pressed without connecting the USB cable
to the PC in Picture Playback Mode.
CHECK CARD (PV-GS200 only):
You are attempting to record MPEG4
moving pictures recorded in [SUPERFINE]
on MultiMediaCard. Use an SD Memory
Card.
CANNOT USE USB CHANGE MODE:
The USB cable is connected to the
Camcorder in Card Recording Mode or
MPEG4 Playback Mode. (MPEG4 Playback
Mode on PV-GS200 only)
CANNOT OPERATE:
You are attempting to record pictures on a
Card while connecting the USB cable to the
Camcorder in Tape Recording/Playback
Mode.
UNABLE TO WRITE
(MULTI RECORDING):
The [PHOTO SHOT] Button is pressed
when you are recording pictures on a Tape
while setting the Digital Effect [MULTI] of
[EFFECT1].
UNABLE TO WRITE
(MPEG4 RECORDING) (PV-GS200 only):
The [PHOTO SHOT] Button is pressed
when you are recording MPEG4 moving
pictures.
You are attempting to record on a tape
when MPEG4 Recording from external
input signals is in progress.
UNABLE TO WRITE:
The Recording Start/Stop Button is pressed
when you are recording still pictures on the
Card.
CASSETTE DOOR OPEN:
Close the Cassette Compartment Cover
before recording.
NO TITLE:
Titles are not recorded.
UNABLE TO INSERT TITLE:
You are attempting to perform Title In
Function when MPEG4 Recording is in
progress or RapidFire Consecutive
Photoshot function is set. (MPEG4
Recording on PV-GS200 Model only)