Compaq Presario 1905 Maintenance & Service Manual page 63

Compaq.com - Compaq Presario 1900 Series Maintenance and Service Guide - Models: 1905, 1906, 1910, 1915, 1919, and 1920
2402 through 2456
2458 through 2480
3206
8601 through 8602
3301 through 6623
Processor Test Error Codes
Error
Code
101-xx CPU test failed
102-xx Coprocessor or Weitek Error
103-xx DMA page registers test failed
104-xx Interrupt controller master test
failed
105-xx Port 61 error
106-xx Keyboard controller self-test failed
107-xx CMOS RAM test failed
108-xx CMOS interrupt test failed
109-xx CMOS clock test failed
110-xx Programmable timer load data test
failed
113-xx Protected mode test failed
114-01 Speaker test failed
200 -xx Memory machine ID test failed
202-xx Memory system ROM checksum
failed
203-xx Write/Read test failed
204-xx Address test failed
211-xx Random pattern test failed
214-xx Noise test failed
215-xx Random address test failed
file:///C|/SERVICE%20MANUALS/COMPAQ%20_%20chec...%201915%201919%201920%201922%201925/error.html (2 of 7)6/27/2004 5:05:10 AM
Audio Test
Touch Pad Pointing Device Test
CD/DVD Test
Description
Memory Test Error Codes
Recommended Action
Replace the processor and retest.
1. Run the Configuration and
Diagnostics Utilities.
2. Replace the processor board and
retest.
Replace the system board and retest.
1. Check system configuration.
2. Verify cable connections to speaker.
3. Replace the system board and retest.
1. Flash the system ROM and retest.
2. Replace the system board and retest.
1. Remove the memory module and
retest.
2. Install a new memory module and
retest.