Features - Emerson LC260EM2 Owner's Manual

18
Channel List
The channels selected here can be skipped when selecting the
channels using CH ▲/▼.
Those channels can still be selected with the Number buttons.
1
Use ▲/▼ to select [Channel List], then press OK.
2
Use ▲/▼ to select the channel you want to remove, then
press OK.
Picture
Sound
Setup

Features

Language
USB
• The channel display for the removed channel darkens.
You will not be able to select the channel again using
CH ▲/▼.
• To reactivate a removed channel, use ▲/▼ and press
OK. The registered channels are highlighted.
• When you remove a main channel, its subchannels are
removed as well.
Note
• The channel with the [DTV] indicated on the display is ATSC.
Otherwise the channel is NTSC.
Add Channels
This function lets you add the off the air along NTSC or analog
Cable channels that were not added by the autoprogram due
to reception conditions at the initial setting.
1
Use ▲/▼ to select [Add Channels], then press OK.
2
Use the Number buttons to enter the number of the
channel you want to add, then press OK.
Picture
Sound
Setup
Features
Language
USB
Note
• If setup completes successfully, [Added to the channel list.] is
displayed.
• If external input is used, it is not possible to register the channel
and [Unavailable] will be displayed on the TV screen.
• By using CH ▲/▼, you can select the memorized channels only.
Channel List
DTV
DTV
Highlight channels for
Ch Up / Down key selection.
DTV
DTV
Ch Select Watch / Skip
Add Channels
Add Channels
For analog channels, select a
channel to be added using
number keys.
For digital channels, you must
perform Autoprogram function.
Ch Change Back
Antenna Confirmation
ATSC
This function lets you check the digital signal strength of each
channel.
1
Use ▲/▼ to select [Antenna], then press OK.
2
Use the Number buttons or CH ▲/▼ to select the
channel for which you want to check the digital signal
strength.
6.1
8.1
9
27
Picture
48.1
Sound
58
67.1
Setup
Back
Features
Language
USB
Note
• If the channel is set to analog channel or external input, you
cannot confirm the antenna condition.
Features
1
Use ▲/▼ to select the item you want to adjust, then press
OK.
Picture
Sound
Setup
Features
11
Language
USB
2
Adjust the following items.
Antenna
Back
Current 50 Max 50
Ch Change
Features
Closed Caption
Child Lock
ECO On
PC Settings
fun-Link (HDMI CEC)
Location Home
E-Sticker − −
Current Software Info
11.1