Setup - Emerson LC260EM2 Owner's Manual

TV Speakers
Select the audio output from the unit's speakers, or not. If your
amplifier is HDMI link function compatible and connected by
an HDMI cable to this unit, some sound operations such as
volume up can be changed by using this unit's remote control.
Make sure [fun-Link Control] is set to [On].
Use ▲/▼ to select the desired option, then press OK.
On
The sound will be output from the unit's speakers.
The sound will not be output from the unit's
Off
speakers.
You can control audio output from your
Ext. Amp
connected HDMI link devices by using this unit's
remote control.
Note
• We do not guarantee 100% interoperability with other brands of
HDMI link compliant devices.
• [Unmute] may be displayed on the TV screen when you recover
the volume from your amplifier.
Primary MTS
You can set the output mode as a default for the sound mode
(NTSC only).
This setting is not interlocked when you change the output
mode by pressing SAP. [Sound Functions]
Use ▲/▼ to select the desired option, then press OK.
Stereo
Outputs stereo-audio.
Mono
Outputs mono-audio.
SAP Outputs second audio program.

Setup

Before you begin:
Make sure the unit is connected to antenna or cable.
1
Use ▲/▼ to select the item you want to adjust, then press
OK.
Setup
Picture
Autoprogram
Sound
Channel List
Add Channels
Setup
Antenna
Features
Language
USB
2
Adjust the following items.
Autoprogram
If you switch wires (e.g. between antenna and CATV) or if you
move the unit to a different area after the initial setting, or if
you restore the DTV channels you deleted, it is recommended
to use Autoprogram to perform a new channel search.
p. 22
➠
1
2
p. 12
➠
Note
• After setting [Autoprogram], using CH ▲/▼ on the remote
• If you are not receiving a signal from your cable service, contact
• If you press
• Even if [Autoprogram] is completed, the channel setting will be
• The PIN code will be required once you set a PIN code in the
• If you want to change your PIN code, follow the instruction of
Use ▲/▼ to select [Autoprogram], then press OK.
Use ▲/▼ to select an appropriate option, then press OK.
Autoprogram
Picture
Auto program will rescan all channels.
Sound
Auto programming may take more than 20
minutes to complete.
Select your signal source.
Setup
Features Antenna
Language
Cable
USB
• When connected to VHF / UHF antenna, select [Antenna].
• When connected to CATV, select [Cable].
• [Autoprogram] will begin.
Please wait while the system is scanning for channels.
Auto programming may take more than 20 minutes to
complete.
75%
Digital channels
Analog channels
• When the scanning and memorizing are completed, the
lowest memorized channel will be displayed.
control skips unavailable programs automatically.
the Cable provider.
or MENU during autoprogram, the setup of TV
channels will be canceled.
lost if the AC power cord is unplugged before the unit goes into
standby mode by pressing .
[Child Lock]. p. 20
➠
[Change PIN]. p. 21
➠
English
Back
Antenna
Cable
Or
ANT.IN
10 ch
6 ch
Exit
17