UNPACKING YOUR MD 307 HYBRID INTEGRATED AMPLIFIER ........4 SETTING UP THE MD 307 HYBRID INTEGRATED AMPLIFIER ........5 CONNECTING ADDITIONAL SOURCES TO THE MD 307 HYBRID INTEGRATED AMPLIFIER .. 5 SET UP THE MD 307 HYRBID INTEGRATED AMPLIFIER WITH AN EXTERNAL HOME THEATER PROCESSOR ....................
FM tuner will help ensure optimum performance as quickly as possible. Once again, thank you for including a MAGNUM DYNALAB product in your entertainment system. We are sure that you will have years of listening pleasure...
Carefully remove the MD 307 Hybrid Integrated Amplifier from the end caps and wrapping, inspect all sides. Pay special attention to the corresponding areas on the unit where damage was found to the shipping carton.
CONNECTING ADDITIONAL SOURCES TO THE MD 307 HYBRID INTEGRATED AMPLIFIER CAUTION As standard practice, you should always turn off the main power to the MD 307 Hybrid Integrated Amplifier whenever any source component, interconnect or loudspeaker is being changed in your system.
Page 6
- - 6 3. With volume set to zero, power up the source, initialize the playback, and slowly adjust volume to desired level.
To Connect to a Home Theater Processor 1. Turn all the power off to the MD 307 and unplug the power cord. 2. Connect your theater processor Main Left and Right interconnects into the MD 307 Hybrid Integrated Amplifier through the A3 input.
OPTIONAL DIGITAL AUDIO CONVERTER (D.A.C) The Digital Audio Converter (D.A.C.) provides an additional USB, and two (2) coaxial inputs or one optical and one RCA in the back of the MD 307 Hybrid Integrated Amplifier. 1. Connect an external source to the USB, or either of the coaxial inputs.
A6 REMOTE CONTROL REMOTE OPERATION ON INTEGRATED AMPLIFIERS AND RECEIVERS WITH THE A6 REMOTE 1. The remote is activated with the “Audio” button. You may program other components. 2. Turn your amplifier on/off with the “ON “ button. 3. Volume is controlled by the volume “Up” and “Down”...
1. POWER BUTTON-Turns on main power 2. MUTE –Turns audio output off, or back on 3. INPUT - Sequentially moves through the inputs on the rear of the MD 307 4. VOLUME CONTROL – The digitally controlled precision volume control allows you to vary the volume from 0-99.
• Power amp off • Control function error • Display should still be active Unit seems to be • Turn off the MD 307, Unplug frozen – functions don’t work the unit for 1 minute, restart unit • Not compatible •...
Continuous of all Voltages and Current Fuse Replacement +3.0 Db (located with AC plug) 19" x 20" X 6.5" Tube Specifications 65 lbs Warranty (Tubes) 120V, 06 amp slow blow OR 240V, 5amp slow blow 2 x 6922 Magnum Dynalab Cryovalve 1 year...
SAFETY SHEET IMPORTANT SAFETY INSTRUCTIONS 1. KEEP THESE INSTRUCTIONS 2. HEED ALL WARNINGS 3. FOLLOW ALL INSTRUCTIONS 4. DO NOT USE THIS APPARATUS IN WATER 5. CLEAN ONLY WITH DRY CLOTH 6. DO NOT BLOCK ANY VENTILATION OPENINGS, INSTALL IN ACCORDANCE WITH THE MANUFACTURER’S INSTRUCTIONS.
LIMITED WARRANTY Register your product at www.magnumdynalab.com Magnum Dynalab Ltd. herein referred to as the “manufacturer” guarantees this product to be free of defect in both material and workmanship and agrees to remedy any such defect or replace any defective component at no charge for a period of two years from date of sale to the first end user.
Page 17
COVER OR FACEPLATE, NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.