Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Magnum MD 309
Summary of Contents for Magnum MD 309
- Page 1 - 1 - Magnum Dynalab MD 309 HYBRID INTEGRATED AMPLIFIER INSTRUCTION MANUAL...
-
Page 2: Table Of Contents
INPUT PRESET VOLUME PROCEDURE ........................5 CONNECTING ADDITIONAL SOURCES TO THE MD 309 HYBRID INTEGRATED AMPLIFIER ..... 7 SET UP THE MD 309 HYRBID INTEGRATED AMPLIFIER WITH AN EXTERNAL HOME THEATER PROCESSOR ..................................7 HOOKING UP A SUBWOOFER TO YOUR SYSTEM ....................8 DIGITAL AUDIO CONVERTER (D.A.C) OPTION ...................... -
Page 3: Dear Valued Customer
FM tuner will help ensure optimum performance as quickly as possible. Once again, thank you for including a MAGNUM DYNALAB product in your entertainment system. We are sure that you will have years of listening pleasure... -
Page 4: Unpacking Your Md 309 Hybrid Integrated Amplifier
Carefully remove the MD 309 Hybrid Integrated Amplifier from the end caps and wrapping, inspect all sides. Pay special attention to the corresponding areas on the unit where damage was found to the shipping carton. -
Page 5: Setting Up The Md 309 Hybrid Integrated Amplifier
6. Turn the power switch on the front panel touchscreen to the ON position. The screen will turn on displaying the Magnum Dynalab Logo as the 309 is warming up. The 309 will then display the current input setting and volume level. - Page 6 - 6 -...
-
Page 7: Connecting Additional Sources To The Md 309 Hybrid Integrated Amplifier
To Connect to a Home Theater Processor 1. Turn all the power off to the 309 and unplug the power cord to the MD 309 Hybrid Integrated Amplifier. -
Page 8: Hooking Up A Subwoofer To Your System
DIGITAL AUDIO CONVERTER (D.A.C) OPTION If you chose the Digital Audio Converter (D.A.C.) option, an additional USB, and two (2) coaxial inputs have been installed in the back of the MD 309 Hybrid Integrated Amplifier. 1. Connect an external source to the USB, or either of the coaxial inputs. -
Page 9: Rc6 Remote Control
3. INPUT: Adjusts the selected source received by the preamplifier section of the MD 309 Hybrid Integrated Amplifier (i.e. Tuner, CD, Aux 1). Push “Input” and then the corresponding number key for the input you want. Note: There is a 10 second delay when switching inputs. -
Page 10: Image Of Rc6 Remote
- 10 - IMAGE OF RC6 REMOTE... -
Page 11: Control/Display Functions
2. LEFT CHANNEL METER – Indicates the volume level of the left channel in dB. 3. TOUCHSCREEN DISPLAY/POWER – The main display for the MD 309 Hybrid Integrated Amplifier. This is used to power up the unit, adjust the volume, and display the input and volume level. -
Page 12: Diagram Of Md 309 Hybrid Integrated Amplifier
- 12 - DIAGRAM OF MD 309 HYBRID INTEGRATED AMPLIFIER... -
Page 13: Trouble Shooting
- 13 - TROUBLE SHOOTING PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION • Power cord disconnected • Connect power cord No sound, meter lights • Power off at source • Check AC source are not on • Fuse blown • Check rear panel fuse •... -
Page 14: Specifications
Shipping Weight Continuous of all Voltages and Current Fuse Replacement +3.0 Db 19" x 20" X 6.5" Tube Specifications 65 lbs Warranty (Tubes/Touchscreen) 120V, 10amp slow blow OR 240V, 5amp slow blow 2 x 6922 Magnum Dynalab Cryovalve 1 year/2 years... -
Page 15: Safety Sheet
- 15 - SAFETY SHEET IMPORTANT SAFETY INSTRUCTIONS 1. KEEP THESE INSTRUCTIONS 2. HEED ALL WARNINGS 3. FOLLOW ALL INSTRUCTIONS 4. DO NOT USE THIS APPARATUS IN WATER 5. CLEAN ONLY WITH DRY CLOTH 6. DO NOT BLOCK ANY VENTILATION OPENINGS, INSTALL IN ACCORDANCE WITH THE MANUFACTURER’S INSTRUCTIONS. -
Page 16: Limited Warranty
LIMITED WARRANTY Register your product at www.magnumdynalab.com Magnum Dynalab Ltd. herein referred to as the “manufacturer” guarantees this product to be free of defect in both material and workmanship and agrees to remedy any such defect or replace any defective component at no charge for a period of two years from date of sale to the first end user. - Page 17 - 17 - TO PREVENT FIRE SHOCK OR HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR FACEPLATE, NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.