Magnum Dynalab MD 301 Instruction Manual

Hybrid integrated amplifier

Advertisement

Quick Links

Magnum Dynalab MD 301
HYBRID INTEGRATED AMPLIFIER
INSTRUCTION MANUAL

Advertisement

Table of Contents
loading

Summary of Contents for Magnum Dynalab MD 301

  • Page 1 Magnum Dynalab MD 301 HYBRID INTEGRATED AMPLIFIER INSTRUCTION MANUAL...
  • Page 2: Table Of Contents

    - - 2 TABLE OF CONTENTS TABLE OF CONTENTS DEAR VALUED CUSTOMER ............2 DEAR VALUED CUSTOMER ....................3 UNPACKING YOUR MD 301 HYBRID INTEGRATED AMPLIFIER ........4 SETTING UP THE MD 301 HYBRID INTEGRATED AMPLIFIER ........5 CONNECTING ADDITIONAL SOURCES TO THE MD 301 HYBRID INTEGRATED AMPLIFIER .. 5 SET UP THE MD 301 HYRBID INTEGRATED AMPLIFIER WITH AN EXTERNAL HOME THEATER PROCESSOR ....................
  • Page 3: Dear Valued Customer

    FM tuner will help ensure optimum performance as quickly as possible. Once again, thank you for including a MAGNUM DYNALAB product in your entertainment system. We are sure that you will have years of listening pleasure...
  • Page 4: Unpacking Your Md 301 Hybrid Integrated Amplifier

    - - 4 UNPACKING YOUR MD 301 HYBRID INTEGRATED AMPLIFIER Carefully inspect all sides of the shipping carton for damage. If there are marks or holes in the carton make note of the location in relation to the unit inside. Any obvious dents or scuff marks should alert you to the possibility of damage.
  • Page 5: Setting Up The Md 301 Hybrid Integrated Amplifier

    - - 5 SETTING UP THE MD 301 HYBRID INTEGRATED AMPLIFIER 1. Position the unit away from any spot which may have extremes in temperatures. 2. Place the unit on a very rigid surface capable of holding 75 pounds (34 KG). 3.
  • Page 6 - - 6 3. With volume set to zero, power up the source, initialize the playback, and slowly adjust volume to desired level.
  • Page 7: Set Up The Md 301 Hyrbid Integrated Amplifier With An External Home Theater Processor

    - - 7 SET UP THE MD 301 HYRBID INTEGRATED AMPLIFIER WITH AN EXTERNAL HOME THEATER PROCESSOR The MD 301 Hybrid Integrated Amplifier is equipped with a unity gain input (A3/SSP Mode Input on the Pre-Amplifier section). This is a switchable input, meaning the input can be used as a normal pre-amplifier input or in unity gain mode.
  • Page 8: Optional Digital Audio Converter (D.a.c)

    - - 8 OPTIONAL DIGITAL AUDIO CONVERTER (D.A.C) The Digital Audio Converter (D.A.C.) provides an additional USB, and two (2) coaxial inputs or one optical and one RCA in the back of the MD 301 Hybrid Integrated Amplifier. 1. Connect an external source to the USB, or either of the coaxial inputs. 2.
  • Page 9: Control/Display Functions

    - - 9 CONTROL/DISPLAY FUNCTIONS 1. POWER BUTTON-Turns on main power 2. MUTE –Turns audio output off or back on 3. INPUT - Sequentially moves through the inputs on the rear of the MD 301 4. VOLUME CONTROL – The digitally controlled precision volume control allows you to vary the volume from 0-99.
  • Page 10: Diagram Of Md 301 Hybrid Integrated Amplifier

    DIAGRAM OF MD 301 HYBRID INTEGRATED AMPLIFIER...
  • Page 11: Trouble Shooting

    TROUBLE SHOOTING PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION • Power cord • Connect power cord No sound • Check AC source disconnected • Power off at source • Check rear panel fuse • Fuse blown • Check installation of • Interconnect not interconnects •...
  • Page 12: Specifications

    SPECIFICATIONS Power Output 100 Watts into 8 Ohms, 200 Watts into 4 Ohms Audio Frequency Response (+/-0.1dB) + Zero, -0.25dB, 2Hz - 100KHz Signal to Noise Ratio -110dB, A-Weighted Total Harmonic Distortion 0.05% at any power Class of Operation Class A/B, Class A at 1-3 Watts Input Impedance Output Impedance after volume control Inputs...
  • Page 13: Safety Sheet

    SAFETY SHEET IMPORTANT SAFETY INSTRUCTIONS 1. KEEP THESE INSTRUCTIONS 2. HEED ALL WARNINGS 3. FOLLOW ALL INSTRUCTIONS 4. DO NOT USE THIS APPARATUS IN WATER 5. CLEAN ONLY WITH DRY CLOTH 6. DO NOT BLOCK ANY VENTILATION OPENINGS, INSTALL IN ACCORDANCE WITH THE MANUFACTURER’S INSTRUCTIONS.
  • Page 14: Limited Warranty

    LIMITED WARRANTY Register your product at www.magnumdynalab.com Magnum Dynalab Ltd. herein referred to as the “manufacturer” guarantees this product to be free of defect in both material and workmanship and agrees to remedy any such defect or replace any defective component at no charge for a period of two years from date of sale to the first end user.
  • Page 15 COVER OR FACEPLATE, NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This manual is also suitable for:

Md 301

Table of Contents