Table of Contents
Advertisement
4.3. MOTION
Under motion search, you are able to search for all areas that have been recorded when motion is detected.
It is a very specific search instruction to eliminate time loss and unwanted search areas. If a motion is
detected in each channel, you can set a desired area to perform the search.
1) If you set the manual area to Motion Region, the Setup button will be activated.
2) Motion Region: Select an area to perform search.
- All Area: Searches for all areas of the selected channel.
- Current Area: Searches for the motion area for each channel specified in "Motion Detection Setting the
Motion Detection Area"
- Manual Area: You can set the motion area manually.
3) Setup: The Setup button will be activated only if you have set the motion area to Manual. Press the button
to display the area setting window.
4) Date/Time: The Date/Time will be automatically set by the hour and the end time will be automatically set
to one hour later than the start time if it is set.
5) Preview: Select a data item in the list to display the still image of the item.
6) Select a data item and click Play. The screen switches to the motion data playback mode.
4.4. PROTECT
H.264 Pentaplex DVR
Start Date & Time
1
End Date & Time
2
Preview Display
3
How to retrieve Protected files
Any recorded files (video/audio)
you set as protected will be stored under this
list and will no longer available by regular
CALENDAR/TIME search. You can search, playback,
backup, remove from this menu.
Click SEARCH -> PROTECT.
You will see the file list with recording start
Time.
Select a file and click PLAY button. Channel (camera)
name will be displayed in WHITE to notify you that
this is a protected video file (non-protected file will
show channel (camera) name in white during the
Playback).
59
Advertisement
Table of Contents
