Table of Contents
Advertisement
Navigating to different channels by using the remote control.
When no channels are selected, you can use the remote control to navigate to another interval. In this example,
it is in a 4-split screen. By pressing the direction button on the remote control ▶, it will take you to the next
four channels. For an 8 channel DVR, it will navigate you to next four channels and back to the first four channels.
This function will also apply to the 16 channel DVRs.
If a channel is selected (has yellow border), you can use the remote control by using the arrow buttons to
navigate to individual channels. To select a channel using the remote control, press the enter button
a yellow border will appear on that channel, (see above picture). After the channel has been selected and by
using the arrow buttons on the remote control, you can navigate to desired channels.
! This function only applies to Mars Plus 8 channel and 16 channel DVRs. Mars Plus 4
channel DVR will not have this function available.
H.264 Pentaplex DVR
19
and
Advertisement
Table of Contents
