Table of Contents
Advertisement
3.2.2. RECORD QUALITY
Setup the record quality parameters for each camera. (see picture as below)
1) RESOLUTION [D1, Half D1 and CIF]
There are three recording resolution modes you can
choose from. D1 is the highest resolution.
2) RECORD RATE (F/S) [NTSC: 30-1] [PAL 25-1]
Select recording speed in frame (image) per second.
Higher F/S requires more HDD spaces.
3) RECORD QUALITY [Basic / Normal / Good / Very Good / Excellent]
Select recording video quality. You can select level 1 (low) to level 8 (high) for video quality.
3.2.3. RECORDING SCHEDULE SETUP
This menu allows you to create own recording schedule and trigger type . To enable this feature,
schedule recording feature at RECORD->POLICY->SCHEDULE menu must be turned "ON". Using direction keys
and ENTER button, choose preferred record types (such as ALWAYS, MOTION, SENSOR or MOT+SEN) on
the selected time and date. Different color will represent different recording types.
H.264 Pentaplex DVR
1) CAMERA
Select channel for schedule recording.
2) SELECT DAY [DAILY / SUN – SAT]
Select the desired day for schedule recording.
3) TIME
Move the cursor to desired time and press ENTER
key to set it highlighted. Press ENTER again to
change schedule recording option by color.
You can set different recording schedule and type
for each camera (channel) or you can apply
current schedule setting to all other cameras by
pressing APPLY TO ALL CH button.
28
Advertisement
Table of Contents
