Start Button; Engine Stop Switch - Honda TRX420TM Owner's Manual

Controls & Features

Start Button

LEFT HANDLEBAR
(2)
(1) start button

(2) engine stop switch

The start button ( ) is used for starting the engine. Pushing the button in
starts the engine. See
When the start button is pushed, the starter motor will crank the engine.
The starter motor will not operate if the engine stop switch is in the OFF
( ) position when the start button is pushed.
Engine Stop Switch
The engine stop switch ( ) is used to stop the engine in an emergency.
To operate, slide the switch to either OFF (
must be in the RUN (
normally remain in the RUN (
OFF.
If your ATV is stopped with the ignition switch ON (
engine stop switch OFF (
ignition switch OFF (
Instruments & Controls
20
1
Starting Procedure,
2
) position to start the engine, and it should
), the battery will discharge. Turn the
) to prevent battery discharge.
START
OFF
RUN
page 53
) position. The switch
) position even when the engine is
(1)
.
) and the