Lcd Tv And Operating Buttons; Viewing The Connections- Back Connectors - Telefunken T26KWM875 DVB-T Instruction Manual

LCD TV and Operating Buttons

FRONT and REAR VIEW

Viewing the Connections- Back Connectors

1. SCART socket inputs or outputs for external devices.
Connect the SCART cable between SCART socket on TV and SCART
socket on your external device (such as a decoder, a VCR or a DVD
player).
Note: If an external device is connected via the SCART socket, the TV
will automatically switch to AV mode.
2. PC Input is for connecting a personal computer to the TV set. Connect
the PC cable between the PC INPUT on the TV and the PC output on
your PC. Component Video Inputs (YpBPr) are used for connecting
component video.
You can use PC input to enable YPbPr signal sonnection with a device that has component output.
Connect the YPbPr to PC cable between the PC INPUT on the TV and the component video outputs of
your device.
3. S/PDIF Coaxial Out
4. RF Input connects to an antenna or a cable.
Note that if you use a decoder or a media recorder, you should connect the aerial cable through the
device to the television with an appropriate antenna cable, as shown in the illustration in the following
pages.
5. HDMI 1: HDMI input
HDMI Input is for connecting a device that has an HDMI socket.
Your LCD Television is capable of displaying High Defi nition pictures from devices such as a High
Defi nition Satellite Receiver or DVD Player. These devices must be connected via the HDMI sockets
or Component Socket. These sockets can accept either 480i, 480p, 576p, 576i, 720p, 1080i, 1080p
signals. No sound connection is needed for an HDMI to HDMI connection.
When you use the wall mount kit (optional) with the LCD TV, we would defi nitely recommend to plug all your cables into the
back of the LCD before mounting to the wall.
02_MB45M_[GB]_1810UK_IDTV_BRONZE14_26875W_10066977_50162051.indd 5 02_MB45M_[GB]_1810UK_IDTV_BRONZE14_26875W_10066977_50162051.indd 5
SIDE VIEW
outputs digital audio signals of the currently watched source.
English - 35 -
Control Buttons
1. Up button
2. Down button
3. Programme/Volume / AV
selection button
4. Standby button
Note:You can use "+/-" buttons to
change volume. If you want to change
channels, press P/V/AV button once
and then use "+/-" buttons. If you hold
the P/V/AV button about a few seconds,
source OSD will be displayed. Main
menu OSD cannot be displayed via
control buttons.
26.02.2010 19:33:16 26.02.2010 19:33:16