Input / Output Signal - Hitachi KP-FM200WCL Operation Manual

Input / Output signal

1. Input signal
The level of the trigger signal input to KP-FM200WCL and KP-FMR200WCL is as follows.
(1) Input from CameraLink cable
LVDS level.
(2) Input from DCIN/SYNC connector
High level : +2.5 to +5.0 V
Low level : 0 to +0.3 V
2. Output signal
The level of the VD and FLASH output from KP-FM200WCL and KP-FMR200WCL is as follows.
High level : +5.0V
Low level : 0V
31