Xd Picture Card - Toshiba Portege M400 User Manual

Write protection
Memory Stick can be write protected to safeguard your data. To write-
protect a Memory Stick, slide the lock on the back of the Memory Stick to
the lock position.
Inserting a Memory Stick
To insert a Memory Stick, follow the steps below.
1. Insert the Memory Stick into the Bridge media slot.
2. Press gently to ensure a firm connection.
Removing a Memory Stick
To remove a Memory Stick, follow the steps below.
1. Open the Safely Remove Hardware icon on the Task Bar.
2. Point to Memory Stick and click.
3. Push in the card and release it to pop the card out slightly.
4. Grasp the card and remove it.
■
Make sure the Bridge media slot indicator is out before you remove
the Memory Stick or turn off the computer's power. If you remove the
Memory Stick or turn off the power while the computer is accessing the
Memory Stick you may lose data or damage the card.
■
Do not remove a Memory Stick while the computer is in Standby or
Hibernation mode. The computer could become unstable or data in the
Memory Stick could be lost.

xD picture card

The computer is equipped with a Bridge media slot that can accommodate
xD picture cards with various memory capacities. The xD picture card let
you easily transfer data from devices, such as digital cameras that use xD
picture card flash-memory.
User's Manual
Bridge media slot
Figure 8-5 Inserting a Memory Stick
Optional Devices
Bridge media
slot indicator
Memory Stick
8-7