Power On Display - Toshiba Portege M400 User Manual

HW Setup
General
This window displays the BIOS version and contains two buttons: Default
and About.
Default
About
Setup
This field displays BIOS Version and date.
Display
This tab lets you customize your computer's display settings for either the
internal LCD screen or for an external monitor.

Power On Display

Lets you select the display to be used when the computer is booted (This
setting is only available on Standard VGA mode and is not available on
Windows Desktop properties).
Auto-Selected
LCD + Analog RGB
System LCD Only
If the connected external monitor does not support the computer's current
video mode, selecting the LCD + Analog RGB mode will not display any
image on the external monitor.
When Windows starts up, the screen will be displayed on the external
monitor if it was connected when the notebook was previously switched off
and is still connected when the computer is switched on. Otherwise, the
screen will be displayed on the internal LCD.
7-2
Return all HW Setup values to the factory
settings.
Display the HW Setup version.
Selects an external monitor if one is connected.
Otherwise, it selects the internal LCD (Default).
Selects both the internal LCD and external
monitor for simultaneous display.
Selects the internal LCD even if the external
monitor is connected.
User's Manual