Table of Contents
Advertisement
Quick Reference Guide
Manual Clean
To operate the machine in manual cleaning mode,
perform the following actions:
1. Touch the Manual Clean button on the home
screen.
2. Turn on the vacuum and squeegee by touching
the fan button.
3. Turn on the cleaning head by touching the scrub
brush button.
4. Touch the forward arrow icon until the speed bar
indicator is at the desired speed.
5. Squeeze the handle bar and maneuver the machine over the surface to be cleaned. To stop the
machine, release the handle bar.
Hands-Free Spot Clean
Spot Clean is used to clean a hallway or aisle for a specific distance (minimum of 20 feet). The
hallway/aisle must be between 5.5 feet and 60 feet wide. There must be two walls, one on the left and
one on the right, at the start of Spot Clean for it to accurately measure the width of the area to clean.
© 2013 Intellibot Robotics, LLC All Rights Reserved v3
Page 10
Advertisement
Table of Contents
