Electrical Safety - Black & Decker NV2410N Original Instructions Manual

ENGLISH
Warning! Never attempt to replace the charger unit
with a regular mains plug.
Use your Black & Decker charger only to charge the
u
battery in the appliance/tool with which it was supplied.
Other batteries could burst, causing personal injury and
damage.
Never attempt to charge nonrechargeable batteries.
u
If the supply cord is damaged, it must be replaced by
u
the manufacturer or an authorised Black & Decker
Service Centre in order to avoid a hazard.
Do not expose the charger to water.
u
Do not open the charger.
u
Do not probe the charger.
u
The appliance/tool/battery must be placed in a well
u
ventilated area when charging.

Electrical safety

Your charger has been designed for a specific
voltage. Always check that the mains voltage cor-
responds to the voltage on the rating plate. Never
attempt to replace the charger unit with a regular
mains plug.
Symbols on the charger
Read all of this manual carefully before using the
appliance.
#
This tool is double insulated; therefore no earth
wire is required. Always check that the power
supply corresponds to the voltage on the rating
plate.
w
Short circuit proof safety isolating transformer.
The mains supply is electrically separated from
the transformer output.
8
(Original instructions)