Change The Phone Settings - Polycom CX300 R2 User Manual

Polycom CX300 R2 Desktop Phone User Guide
2 In Audio device, verify that Polycom CX300 is selected for the device you want to use for audio
calls.

Change the Phone Settings

You can modify the volume and text display settings of your Polycom CX300 R2 phone from the startup
screen as the phone is powering on. The startup screen displays for 10 seconds when you are not signed
into the Lync client. When you are signed into the Lync client, the startup screen displays for one second.
After you connect your CX300 R2 phone to your computer and the phone is starting up, the option
5=Settings displays on the screen for five seconds, as shown next. During this time, you can press 5 on the
keypad to change the phone's settings.
.
Note: Settings option does not display with other languages
If the language setting for your Lync client is not English, 5=Settings is not displayed on the phone
during startup. However, you can still access the settings menu by pressing the 5 key during startup.
This section contains instructions for the following tasks:
Change the Volume Button Response Rate
●
Set the Call Volume
●
Change the Display Settings
●
Caution: Do not disconnect your phone from your computer
Do not disconnect your phone from your computer while making changes to the settings. This could
result in data corruption.
Change the Volume Button Response Rate
The volume button response rate sets how quickly the volume increases or decreases after you press the
Volume buttons on the phone.
Polycom, Inc. 9