NEC V230 User Manual page 58

8. Press the  button to select a compatible eyeglass method and press the ENTER button.
(→ page 74)
Set other 3D-related menu options such as [FORMAT] and [L/R INVERT] as necessary.
9. Press the MENU button once.
The menu will disappear.
Selecting input connected to a source of 3D images [COMPUTER / VIDEO / S-VIDEO] (V230X/V260/V230)/
[COMPUTER 1/COMPUTER 2/VIDEO/S-VIDEO (V300X/V260X)
This function switches the 3D mode between ON and OFF for each input.
NOTE:
To confirm that the supported 3D signal is accepted, use either way of the following:
- Make sure that [3D] is displayed in the top right of the screen after the source is selected.
- Display [INFO.] → [SOURCE] → [3D SIGNAL] and make sure that "SUPPORTED" is displayed.
Using NVIDIA 3D Vision
®
1. Setting a computer
(1) Prepare and set devices required for NVIDIA
For more information, visit NVIDIA
http://www.nvidia.com/object/3D_Vision_Requirements.html
(2) From the website of NVIDIA
install it to your computer.
To view 3D images, see page 47.
Select [COMPUTER 1], [COMPUTER 2], or [HDMI].
NOTE:
• The maximum distance for viewing 3D images is 15 m/590 inches from the lens surface under the following restrictions:
- Brightness on the projector: 2000 lumens or greater
- Screen gain: 1
- Viewing position: Facing straight towards the screen center
- Outside light: None
- LCD shutter eyeglasses: Using the optional 3D Goggles (NP01GL)
• If 3D content is played back on your computer and the performance is poor it may be caused by the CPU or graphics chip. In this
case you may have difficulty seeing the 3D images as they were intended. Check to see if your computer meets the requirements
provided in your user's manual included with your 3D content.
• The DLP Link compatible LCD shutter eyeglasses allow you to view 3D images by receiving synch signals, which are included
®
in left eye and right eye images, reflected from the screen. Depending on environments or conditions such as the ambient bright-
ness, screen size or viewing distance, the LCD shutter eyeglasses may fail to receive synch signals, causing poor 3D images.
• When the 3D mode is enabled, the Keystone correction range will be narrower.
• When the 3D mode is enabled, the following settings are invalid.
[WALL COLOR], [PRESET], [REFERENCE], [COLOR TEMPERATURE]
• Refer to the [SOURCE] screen under the [INFO.] menu for information on whether the input signal is 3D compatible.
• Signals other than those listed in "Compatible Input Signal List" on page 90 will be out of range or will be displayed in 2D.
(V300X only)
TM
®
website.
®
, download the updated driver of an appropriate graphics board for the projector, and
®
3D Vision™.
49
4. Convenient Features