Reflecting The Image - NEC V230 User Manual

WARNING
* Installing your projector on the ceiling must be done
by a qualified technician. Contact your NEC dealer
for more information.
* Do not attempt to install the projector yourself.
• Only use your projector on a solid, level surface. If
the projector falls to the ground, you can be injured
and the projector severely damaged.
• Do not use the projector where temperatures vary
greatly. The projector must be used at temperatures
between 41˚F (5˚C) and 104˚F (40˚C). ([ECO MODE]
is set automatically to [ON] at 95°F to 104°F/35°C
to 40°C. Note that [ECO] mode will be set to [ON]
automatically at 86°F to 104°F/30°C to 40°C when
used in [HIGH ALTITUDE].)
• Do not expose the projector to moisture, dust, or
smoke. This will harm the screen image.
• Ensure that you have adequate ventilation around
your projector so heat can dissipate. Do not cover
the vents on the side or the front of the projector.
2. Installation and Connections

Reflecting the Image

Using a mirror to reflect your projector's image enables
you to enjoy a much larger image when a smaller space
is required. Contact your NEC dealer if you need a mirror
system. If you're using a mirror system and your image
is inverted, use the MENU and  buttons on your
projector cabinet or your remote control to correct the
orientation. (→ page 67)
11