Beyonwiz T3 Instruction Manual page 43

38 System Configuration
Scroll down to Network wizard and press
'OK' in the next screen you will get the
Welcome message for the Network wizard,
press 'OK' to start and you will get this
page>
Select Scan available networks and then
press 'OK'
In the next screen it will list the available
wireless networks, scroll to the network that
you wish to connect to and press
'Ok' and you will see this screen>
Use interface and Use DHCP should be
'On' and Hidden network should be 'Off' as
pictured. Choose your encryption type with
your left / right arrow.
Encryption types: Unencrypted - WEP - WPA or WPA2 (If your network detects WPA2 use the
right arrow to change to WPA or WPA2)
Next you need to enter your WiFi
encryption key or password, you can do
this two ways:
1) Scroll to Encryption key and use the
numbers on your remote control to enter
the password in an old sms style of
texting. Press 'OK' to save settings and
connect to your network.
'or'
2) Press the 'TEXT' button on the
bottom right corner of your T3 remote and
a virtual keyboard will popup as pictured >
Once you enter the password scroll to the
OK button and press 'OK' and then in the
next screen you should see the key in the
Encryption key field, press 'OK' again
connect to the network.