Replacing The Tail/Brake Light; Bulb - Yamaha FZ8NA Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
9. Install the headlight bulb cover,
then connect the headlight cou-
pler.
10. Connect the coupler, then insert
the projection on the headlight unit
into the grommet on the vehicle to
fit the headlight unit in its original
position.
7
1. Projection
2. Grommet
11. Install the headlight unit bolts.
12. Install the bolt behind the headlight
unit.
13. Place the side covers in their origi-
nal position, then install their bolt.
14. Place the top cover in its original
position, and then install its bolts.
2 1
15. Have a Yamaha dealer adjust the
headlight beam if necessary.

Replacing the tail/brake light

bulb

1. Remove the passenger seat. (See
2. Remove the tail/brake light bulb
1. Tail/brake light bulb socket
3. Remove the burnt-out bulb by
4. Insert a new bulb into the socket,
5. Install the socket (together with the
6. Install the passenger seat.
7-35
page 4-14.)
socket (together with the bulb) by
turning it counterclockwise.
pushing it in and turning it counter-
clockwise.
push it in, and then turn it clock-
wise until it stops.
bulb) by turning it clockwise.
EAU24115
1