Care And Cleaning - Platinum 7096653 CM4117T Instruction Manual

ENGLISH
Pause serve
This feature allows you to pour a cup of coffee before the entire brew cycle has
completed. By removing the Carafe, the flow of coffee from the bottom of the
filter will stop.
Caution: Return carafe to warming plate within 30 seconds. Hot water
continues to flow into the filter when this feature is used. Overflowing coffee
and hot water would be a burn hazard.
Automatic shutoff
The Automatic Shutoff feature shuts off the warming plate 2 hours after brew
cycle begins. Always turn coffee maker off and unplug when finished.

CARE AND CLEANING

Completely clean and dry all detachable parts after every use. It must be
maintain for 30 minutes every two cycles. The purpose is let the appliance cool
down completely.
1. Always turn coffee maker off and remove the plug from the electrical outlet
before cleaning.
2. Remove all the detachable parts.
3. After remove the carafe from the warming plate, discard any remaining
coffee. The carafe and lid can be washed in warm soapy water and rinsed
thoroughly, or placed in a dishwasher. The carafe and carafe lid should be
placed on the upper rack only.
4. Pull out the filter holder. Remove filter cover and filter.
5. The grinder box, grinder box lid, filter, filter holder and filter cover can be
washed in warm soapy water and rinsed thoroughly, or cleaned in the upper
rack of the dishwasher. Dry all parts after every use.
6. Do not put any water in the unit once the grinder box has been removed.
Wipe the area under the grinder box with a damp cloth. If water gets into the
grinder motor, the motor may become damaged and may malfunction.
7. Once after cleaning, reverse the above steps.
Note:
a) Do not use scouring agential or harsh cleansers on any part of the coffee
maker.
b) Never immerse base unit in water or other liquid. To clean base, simply
wipe with a clean, damp cloth and dry before storing.
c) Wipe the keeping warm plate with a clean, damp cloth. Never use rough,
abrasive material or cleaners to clean the resting plate.
d) Do not dry the inside of the tank with a cloth, as lint may remain.