Care And Cleaning; Cleaning Mineral Deposits - Platinum CM4313B-CB Instruction Manual

ENGLISH

CARE AND CLEANING

Be sure to unplug this appliance before cleaning. To protect against electrical shock, do not
immerse cord, plug or unit in water or liquid. After each use, always make sure plug is first
removed from wall outlet.
1. Clean all detachable parts after each use in hot, sudsy water.
2. Wipe the product's exterior surface with a soft, damp cloth to remove stains.
3. Water droplets may buildup in the area above the funnel and drip onto the product base during
brewing. To control the dripping, wipe off the area with a clean, dry cloth after each use of the
product.
4. Use a damp cloth to gently wipe the warming plate. Never use abrasive cleaner to clean it.
5. Replace all parts and keep for next use.

CLEANING MINERAL DEPOSITS

To keep your coffee maker operating efficiently, you should clean away the mineral deposits left
by the water regularly according to the water quality in your area and the frequency of use. If the
mineral deposit is excessive, the appliance will represent the following signs:
1. Fill the tank with water and descaler to the MAX level (the proportion of water and descaler is
4:1, details refers to the instruction of descaler. Please use"household descaler", you can use
the citric acid (obtainable from chemist's or drug stores) instead of the descaler (one hundred
parts of water and three parts of citric acid).
2. Make sure the filter is free of coffee powder.
3. Press Power switch to "I" position. The indicator will be illuminated. The appliance will begin
working.
4. Make about two cups of water.
5. Press the Power switch to "O" position to stop the unit immediately, make the descaler deposit
in the unit at least 15 minutes.
6. Switch on the appliance and run off the solution until the water tank is completely empty.
7. Rinse by operating the appliance with water at least 3 times.
5