Mounting Details - Ravel RE –102 Installation, Commissioning & Operating Manual

3.2

Mounting Details

Place the panel in its mounting position and fix the panel to the
wall using the slots of the four screws. Ensure the enclosure and the
inner parts of the panel are given sufficient protection during
installation. All external cables are to be entered via the
preformed knockouts located at the top of the panel.
When the installation of all the cables has been completed, clean
the interior of the enclosure ensuring all masonry debris and drilling
swords are removed.
290 mm
14 P/N RE - 102 / 104 Rev. No. 0
30 mm
175 mm
mm
∅19