Table of Contents
Advertisement
Section 8–Saving Site Report/Configurations
2. Assign a filename for the report. The default filename consists of the date, time, and the
site ID of the first actuator (Figure 8-2).
3. Select 'Text Site Report File (*.txtrpt)' from the 'Save as type' drop down selection, if not
already selected.
4. Click 'Save'.
1. Assign a filename to the report.
The date, time, and the SiteID of the first
configured actuator are used for the suggested
filename.
2. Select the file type.
Files saved in the '*.txtrpt' format can be opened in
Word or any other text editor, such as Notepad or
Wordpad.
8-2
3. Click 'Save'.
Figure 8-2. Selecting the File Format for Word.
May 2005
ATC200-Lite Teletilt
Remote Control Downtilt System
®
Note: All site reports are
saved to
C:\ATC200_Site_Files.
This directory is created
if it does not pre-exist
on the computer.
Bulletin 639510
Advertisement
Table of Contents
