Section 10 Part Numbering Scheme And Ordering Guide; Part Numbering Scheme - Andrew ATC200-Lite Teletilt Installation And Operation User Manual

Section 10
Part Numbering Scheme and Ordering Guide

10.1 Part Numbering Scheme

PART NUMBER
ATC200-Lite-00xx
ATM200-001
ATJB200-A01-00x
ATS-A01-002
ATS-B01-003
ATCB-B01-xxx
ATLP-200-001
602299
40417*
68MCLICK*
*Additional cable accessories are available. See 'Cable Installation Accessories' link from Andrew's
Teletilt ATC200 web site.
®
Bulletin 639510
DESCRIPTION
Local controller system. The system includes:
• local controller, model ATC200-Lite
• Ethernet crossover cable
• power cord*
• Phoenix 48 Volt power connector
• this installation and operation manual, part number 639510
In the future, the system will also include a CD for the ATC200-Lite software.
*The "xx" denotes power cord options as follows:
01 = Australasia (Australia and Asia)
02 = Europe
Actuator
Junction Box (Each junction box has 1 input, and the "x" denotes the number
of outputs as shown below.)
4 = 4-Way 7 = 7-Way
Two-way splitter enables daisy-chaining actuators on single band antennas.
Three-way splitter enables daisy-chaining actuators on quad port antennas.
Control cable linking first to second, or second to third actuators. The "B"
denotes connectors assembled at both ends. The "01" designates cable type.
The "xxx" denotes cable length options as follows:
001 = 1 meter
002 = 2 meters
003 = 3 meters
004 = 4 meters
005 = 5 meters
006 = 6 meters
009 = 9 meters
010 = 10 meters
015 = 15 meters
Lightning Protection Unit (Recommended)
Grounding Kit (Used to ground junction boxes, splitters, and lightning protection
unit.)
Cable Tie Wraps (Used to secure control cable to the tower.)
Hangers (Used to secure control cable to the tower.)
03 = United Kingdom
04 = North America
020 = 20 meters
030 = 30 meters
040 = 40 meters
050 = 50 meters
060 = 60 meters
070 = 70 meters
080 = 80 meters
090 = 90 meters
100 = 100 meters
May 2005 10-1