Section 7–Changing the Electrical Downtilt-Group
9. You will be notified when all antennas
have successfully reached the new tilt
angle. Click 'OK' (Figure 7-4).
10. The 'Set Electrical Tilt for Sector'
screen will display the new electrical
tilt setting in the 'Current Tilt' field. At
this point, either additional tilt angles
may be applied or you may return
to the main screen. To return to the
main screen, click 'Close' (Figure
7-5).
11. After all electrical tilt adjustments are made, a report can be saved to a file for future refer-
ence (see Section 8).
Click 'Close'.
7-4
Figure 7-5. Closing Sector Move Screen.
May 2005
ATC200-Lite Teletilt
Remote Control Downtilt System
®
Click 'OK'.
Figure 7-4. Movement Complete.
Bulletin 639510