Table of Contents
Advertisement
3
Installation
3.2.2 Recirculation Version Air Outlet
• Cut a hole ø 125 mm in the wall unit over the
hood.
• Insert the reducer flange 9 on the hood body
outlet.
• Connect the hood body outlet to the top part of
the wall unit using a rigid or flexible pipe ø120
mm, to be selected by the installer.
• Fix the pipe in position using sufficient pipe
clamps (not supplied).
• Fix the directional grille 8 on the recirculation
air outlet using the 2 screws 12e (2,9 x 9,5)
provided.
• Ensure that the activated charcoal filters have
been inserted.
3.2.3 Electrical Connection
• Connect the hood to the mains through a two-
pole switch having a contact gap of at least 3
mm.
• When opening the sliding carriage for the first
time after installing the hood, pull it out briskly
until it clicks.
8 / 11 EN
Hood / User Manual
Advertisement
Table of Contents
