Table of Contents
Advertisement
Problem
Cannot rotate image.
Images are not displayed on
TV.
Nikon Transfer 2 does not
start when camera is
connected to a computer.
The PictBridge startup
screen is not displayed
when the camera is
connected to a printer.
Cause/Solution
This camera cannot rotate images captured with
another make or model of digital camera.
• Video mode or HDMI is not correctly set in the TV
settings setup menu.
• The cables are connected to the HDMI micro
connector (Type D) and to the USB/audio/video
output connector simultaneously.
• The memory card contains no images. Replace the
memory card. Remove the memory card to play
back images from the internal memory.
• The camera is off.
• The battery is exhausted.
• The USB cable is not correctly connected.
• The camera is not recognized by the computer.
• Confirm system requirements.
• The computer is not set to start Nikon Transfer 2
automatically. For more information about
Nikon Transfer 2, refer to help information
contained in ViewNX 2.
With some PictBridge-compatible printers, the
PictBridge startup screen may not be displayed and it
may be impossible to print images when Auto is
selected for the Charge by computer option in the
setup menu. Set the Charge by computer option to
Off and reconnect the camera to the printer.
A
–
79, E82
83, 88,
E22,
E25
15
20
20
83, 88
–
85
90
79, E83
F15
Advertisement
Table of Contents
