Bosch FNH180K-16 Operating/Safety Instructions Manual page 14

BM 2610034445 03-14_FNH180 3/27/14 11:52 AM Page 14
Maintenance performed by
W RNING
unauthorized personnel
may result in misplacing of the internal
components which could cause serious
hazard. We recommend that all tool service
be performed by a BOSCH factory service
center or authorized BOSCH service station.
Contact your BOSCH service center for
instructions and the following user replaceable
parts; rubber cords, and driver block assembly.
For all other repairs contact your BOSCH
service center.
BATTERIES
Be alert for battery packs that are nearing
their end of life. If you notice decreased
tool performance or significantly shorter
running time between charges then it is time
to replace the battery pack. Failure to do so
can cause the tool to operate improperly or
damage the charger.
TOOL LUBRICATION
Your Bosch tool has been properly lubricated
and is ready for use.
D.C. MOTORS
The motor in your tool has been engineered
for many hours of dependable service. To
maintain peak efficiency of the motor, we
recommend it be examined every six months.
Only a genuine Bosch replacement motor
specially designed for your tool should be
used.
Maintenance
Service Cleaning
To avoid accidents, always
W RNING
disconnect the tool and/or
charger from the power supply before
cleaning. The tool may be cleaned most
effectively with compressed dry air. Always
wear safety goggles when cleaning tools
with compressed air.
Do not attempt to clean by
W RNING
inserting pointed objects
through opening. Sharp edges may
damage internal components causing a
serious hazard.
Ventilation openings, the work contact
element, and the trigger must be kept clean
and free of foreign matter.
Clean the magazine. Remove plastic or
wooden chips which may have accumulated
in the magazine.
Certain cleaning agents
C UTION
and
plastic and rubber parts. Some of these
are: gasoline,
chlorinated cleaning solvents, ammonia and
household detergents that contain ammonia.
Storage
When not in use, the tool should be
disconnected and stored in the storage case in
a warm and dry place.
Do not store the tool in a cold weather
environment.
Keep out of reach of
W RNING
children and personnel
unfamiliar with tool operation. Lock the
storage area. Tools are dangerous in the
hands of personnel unfamiliar with the tool.
-14-
solvents damage
carbon tetrachloride,