Panasonic KX-TG2721NZ Operating Instructions Manual page 37

Registering a handset to the base unit
1
Handset:
M N
2
MbN: "Handset Setup" a M
3
MbN: "Register H.set" a M
4
Base unit:
Press and hold M
R If all registered handsets start ringing, press M
(KX-TG2722)
R The next step must be completed within 90 seconds.
5
Handset:
Wait until "Enter Base PIN" is displayed. a Enter the base unit PIN (default: "0000").
a M N
R If you forget your PIN, contact an authorised service centre.
R When the handset has been registered successfully,
Deregistering a handset
1
M N
2
MbN: "Base Unit Setup" a M
3
335 a M
R All handsets registered to the base unit are displayed.
4
Enter the desired handset number you want to cancel. a M
5
MbN: "Yes" a M
R A confirmation tone sounds.
R The handset does not beep when cancelling its own registration.
6
M N
Changing the base unit PIN (Personal Identification Number)
Important:
R If you change the PIN, please make note of your new PIN. The unit will not reveal the PIN to
you. If you forget your PIN, contact an authorised service centre.
1
M N
2
MbN: "Base Unit Setup" a M
3
MbN: "Base Unit PIN" a M
4
Enter the current 4-digit base unit PIN (default: "0000").
5
Enter the new 4-digit base unit PIN. a M
TG2721_2722NZ(en)_0807_ver002.pd37
N
N
N for about 5 seconds, until the registration tone sounds.
N
N
N
N
N
37
Useful Information
N again to stop, then repeat this step.
stops flashing.
N
N a M N
2012/08/07 10:29:48
37