Brother Network User Manual page 88

Relay broadcast from a machine
FAX@brother.com
In this example, your machine has an E-mail address of FAX@brother.com, you wish to send a document
from this machine to another machine in England with an E-mail address of UKFAX@brother.co.uk, this
machine will then forward the document to a standard fax machine using a conventional telephone line. If
your E-mail address is FAX@brother.com, you must configure a trusted domain name of brother.com on the
machine in England that will broadcast the document to the conventional fax machine. If you do not enter the
domain name information, then the machine in the middle (the machine that will broadcast the document) will
not trust any internet jobs that it receives from the machine in the @brother.com domain.
After the trusted domain is set you can send the document from your machine [e.g. FAX@brother.com] by
entering the E-mail address of the machine [e.g. UKFAX@brother.co.uk] that will forward the document
followed by the phone number of the fax that will receive the document. The following is an example of how
to enter the E-mail address and phone number.
Internet
UKFAX@brother.co.uk(fax#123456789)
UKFAX@brother.co.uk(fax#123456789)
E-mail address
Internet fax and Scan to E-mail (E-mail server) (For MFC-8880DN)
UKFAX@brother.co.uk
Fax Phone Number
The word "fax#" must be
included with the phone
number inside the parenthesis.
123456789
10
10
81