How To Configure The Secure Function Lock 2.0 Settings Using Web Based Management (Web Browser) - Brother Network User Manual

How to configure the Secure Function Lock 2.0 settings using Web Based
Management (web browser)
Basic configuration
a
Click Administrator Settings on the MFC-XXXX (or DCP-XXXX) web page, and then click
Secure Function Lock.
b
Choose On from Function Lock.
Note
To configure Secure Function Lock through the embedded web server, you have to enter the Administrator
Password (four digit number). If the settings have been configured previously using the Panel menu and
you want to change the settings, you must fill in the blank in the Administrator Password box first.
c
Enter an up to 15 digit alphanumeric group name or user name in the ID Number/Name box and then
enter a four-digit password in the PIN box.
d
Uncheck the functions that you want to restrict in the Print box or the Others box. If you want to configure
the maximum page count, check the On box in Page Limit, and then enter the number in the Max box.
Then click Submit.
Web Based Management
8
8
68
8