Brother Network User Manual page 76

e
If you want to restrict the PC printing by PC login user name, click PC Print Restriction by Login Name
and configure the settings. (See Restricting PC print by PC user login name on page 69.)
Scanning when using Secure Function Lock 2.0
The Secure Function Lock 2.0 feature allows the administrator to restrict which users are allowed to scan. When
the scan feature is set to off for the public user setting, only users who have scan selected in the check box will
be able to scan. To push scan from the control panel of the machine users must enter their PIN to access the
scan mode. To pull scan from their computer, restricted users must also enter their PIN on the control panel of
the machine before they can scan from their computer. If the PIN is not entered at the machines control panel
the user will get an error message on their computer when they attempt to pull scan.
Restricting PC print by PC user login name
By configuring this setting, the printer can authenticate by PC user login name to allow a print job from a
registered computer.
a
Click PC Print Restriction by Login Name. The PC Print Restriction by Login Name screen will
appear.
b
Choose the ID Number you set in the ID Number/Name in step c in Basic configuration from the
ID Number pull-down list for each Login Name and then enter the PC user login name in the
Login Name box.
c
Click Submit.
Note
• If you want to restrict PC print per group, choose the same ID Number for each PC login name you want
in the group.
Web Based Management
8
8
69
8