unIt OperatIOn
remote Controller
Table 2: Remote Controller Operation (Continued)
Control Panel
Display Screen
N/A
N/A
N/A
10 | IntroduCtIon
timer buttons (On/Off): Sets the clock timer to enable automatic start
and stop times for air conditioner activity.
Pressing the
enables the user to set the actual time as shown on
the display screen.
light button: Adjusts the brightness of the indoor unit display.
set/Clear button: Either sets (commits) a function or clears (cancels) a
function.
When pressing and holding for 3 seconds or longer, allows the user to set
current time by using the
up/down (directional) buttons: Used in conjunction with other
primary mode and operation buttons. Once in desired mode, user can press
the Up and Down button to move forward or backward in selections. For
example these buttons can be used to set timer clock settings or brightness of
the indoor unit display.
reset button: Pin reset indention (shown under the "UP" button) allows
the user to reset the air conditioner to factory defaults by inserting a pen tip or
small screw driver into hole.
Due to our policy of continuous product innovation, some specifications may change without notification.
Description
buttons.