Tablet PCs TT13 NDEX ............................5 BOUT US ..........................6 EMARKS ................. 6 ELEVANT DATA COMMUNICATION WITH THE DEVICE ............. 6 ESCRIPTION OF THE WARNING SYMBOLS USED IN THIS GUIDE ................6 MAGES MENDMENTS AND ARIATIONS ......................... 6 RADEMARKS ........................... 7 OPYRIGHT ......................
Tablet PCs TT13 BOUT US ads-tec GmbH Raiffeisenstr. 14 D-70771 Leinfelden-Echterdingen Tel: +49 711 45894-0 Fax: +49 711 45894-990 www.ads-tec.com ads-tec GmbH provides large enterprises and globally active corporations with cutting edge technology, up-to-date know-how and comprehensive services in the area of automation technology, data processing technology and systems engineering.
Tablet PCs TT13 EMARKS 1.1 R ELEVANT DATA COMMUNICATION WITH THE DEVICE The following documents are essential for setting up and operating this device: SER MANUAL Contains information for installation, commissioning and operating the device along with technical data of the device hardware.
M/s. ads-tec GmbH. Any violation and infringement thereto will be held liable for compensation of all damages. 1.6 C ERTIFICATIONS TESTS The TT13 system has the following certifications: CE compatibility EN 61000-6-3:2007 Electromagnetive Emission, Klasse B EN 55022:2006 Electromagnetive Emission...
Tablet PCs TT13 1.7 S COPE OF DELIVERY The following components are included in the scope of delivery: 1 x device • 1 x 20V DC power supply unit • 2 x batteries • S AN OPTION 1 x DVD drive, external •...
Tablet PCs TT13 PERATING INSTRUCTIONS This device contains electrical voltages and extremely sensitive components. The manufacturer, or a service partner authorised by the manufacturer, should be consulted if you plan to make any modifications. For this type of work, the device must be switched off at the mains and the power lead must be disconnected.
Tablet PCs TT13 2.3 W ARRANTY EPAIRS During the unit warranty period, any repairs thereto must strictly be conducted solely by the manufacturer or by service personnel that has been duly authorised by the manufacturer. 2.4 H ANDLING AND PROPER DISPOSAL OF LITHIUM BATTERIES This device contains a lithium battery to supply the systemclock until there is no power supply connected.
Tablet PCs TT13 OMMISSIONING The power supply connection and interfaces of this device are installed at the side of case. All supply leads and all required data leads have to be connected before starting commissioning. Warning: The device must be switched off before connecting or disconnecting any cables in order...
Tablet PCs TT13 3.2 R EADINESS FOR PERATION HECKS Accurately check the unit for any hidden damages possibly incurred during improper transport and/or handling or wrong operation site and/or storage conditions (e.g. smoke emissions or formation by the unit, etc.). If any damages are found, the unit must be decommissioned or scrapped.
Tablet PCs TT13 RONT PANEL FUNCTIONS 4.1 S TATUS INDICATORS This device is equipped with different status LEDs in the front. These LEDs indicate current events, like the system activity state, the current accumulator charge status and WLAN activities. YSTEM...
Page 15
Tablet PCs TT13 WLAN LED INDICATORS Static Device is not connected with a WLAN network Static Device is connected with a WLAN network Flashes Device is connected with a WLAN network and has data traffic LUETOOTH INDICATORS Static Bluetooth module is disabled.
Tablet PCs TT13 4.2 F RONT CONTROL KEYS The keys on the front panel are occupied with the following functions by a specific driver in the soft keyboard: YMBOL UNCTION ON / OFF pushbutton for the device (approx. 0,5 seconds delayed) Shift key (SHIFT) for activating the second keyboard level.
Page 17
Tablet PCs TT13 Warning: The front control keys should not be operated with a touch stylus but with the fingers, only. Note: All function keys in the front panel, except for the ON / OFF pushbutton and the Fn button, have 2 function levels each. The primary function is activated by simply pushing the respective key.
Tablet PCs TT13 NTERFACES 5.1 20V DC POWER SUPPLY ECHNICAL DATA OF THE POWER ADAPTER Power consumption: Max. 70 Watts • Input voltage: 100…240 V AC • • Mains frequency: 50…60Hz • Current consumption: 3.5A (230V AC) Max. switch-on current: <...
Page 19
Tablet PCs TT13 ATTERY STATUS REPLACEMENT The TT13 batteries can be removed by using a mechanical ejector on the back of the device. The batteries status can be retrieved by pushing a button on the batteries. The batteries display will light up for a few seconds and show the current batteries charge status on a scale from 0 to 100.
Tablet PCs TT13 5.3 USB CONNECTIONS The USB interfaces are used for connecting peripherals with USB connection. The interfaces comply with the USB 2.0 standard. PIN NUMBER SIGNAL NAME Note: The two side USB ports together have a current limit of 1.5A. This allows trouble-free operation of external devices, like an external DVD drive.
Tablet PCs TT13 5.4 ODU-I NTERFACE OPTIONAL By using the SD Connector, the device can be connected to an Ethernet network (10/100 Mbit). Data throughputs of 10MB can be achieved with a maximum cable length of 5m. Note: This interface does not allow booting via the network. If you want to boot the device via the network connection, we recommend using the LAN interface.
Page 22
Tablet PCs TT13 : RS232 PIN-NUMBER SIGNAL NAME The SD Connect cable must be connected so that the red markers match. For disconnecting the SD Connect cable, it must be pulled rearwards in the area marked in green. This loosens the snap-in mechanism at the end of the plug.
Tablet PCs TT13 ETWORK CONNECTION EXEMPLARY 5.5 N (RJ45) ETWORK CONNECTION If the drivers required for functioning are installed on the device, the control system may be integrated in an Ethernet network supporting the 10/100 Mbit standard by using the Ethernet 10/100BaseT network connector.
Tablet PCs TT13 5.6 MIC An external microphone can be connected via the MIC IN socket on the device by means of a 3.5mm cinch cable. PIN NUMBER SIGNAL NAME Ground Signal, right-hand side Signal, left-hand side ICROPHONE IN FRONT PANEL Additionally, the device has an internal microphone in the front panel.
Tablet PCs TT13 5.7 L INE OUT By using the Line Out socket of this device and connecting via a 3.5mm cinch cable, a stereo audio signal can be output to earphones or to external speakers. PIN NUMBER SIGNAL NAME...
Tablet PCs TT13 & OFTWARE DRIVER INSTALLATION The device will be delivered with a pre-installed Windows operating system on request by the customer. The drivers required for this are already installed and the operating system will be enabled by entering the licence information. Should an initial installation be required, please follow the following steps.
Tablet PCs TT13 6.2 TT13 HDD P ROTECTION Note: The application is attended to protect the read-/write cycle of the hard disk. Via a sensor, sudden kinetic changes or agitation is being recognized. To prevent damage and possible data loss, the reading head will be placed to a neutral position.
Page 30
Tablet PCs TT13 ONFIGURATION The Configuration of the application is done by the file c4hddshock.ini The following settings are possible: Parameter Options LanguageId Parameter to change the language of the surface. Right now the parameter can be DE or EN.
Tablet PCs TT13 6.3 TT13 W IRELESS ONFIGURATION Hinweis: The application is intended to activate/ deactivate the whole hardware in the device, which is intended for wireless data communication. Die Anwendung dient zur kompletten Aktivierung / Deaktivierung der Hardware im Gerät, welche für drahtlose Datenkommunikation dient.
Tablet PCs TT13 6.4 TT13 T OUCH OTATION Note: The service enables the loading for the best configuration for 0° and 90°. If the button landscape/portrait is activated, the switch from 0° to 90 takes effect. Pushing the button again will switch back to 0°.
Page 35
Tablet PCs TT13 ELO T OUCH POINT CALIBRATION The calibration of the ELO Touchscreen can be done via the application in the control panel. Note: If you want to start the calibration for the 90°-View, you first have switch the display calibration via the landscape/portrait button before beginning the ELO Touchscreen calibration.
Page 36
Tablet PCs TT13 Tip the Touchscreen at the marked positions and finish the calibration with the green check. Finally the application can be closed with OK. Note: Before configuring another display view, the ELO Touchscreen application needs to be closed and subsequently started with the new display view.
ONITORING Note: The application is pretended to monitor the temperature and the fan of the TT13. The application starts minimized and is not visible until a fault is recognized. If a fault is recognized, the temperature or the fan icon in the traybar will be displayed.
OFTWARE ACKAGE Note: With the TT13 Software Tools hardware components can be controlled, monitored and evaluated. In case of high exposure the Software Tools will help to prevent lasting damage by protecting important hardware components actively. In diagnostic cases the Software Tools will give information about the system condition and enable fast troubleshooting.
Tablet PCs TT13 6.9 WLAN The device is equipped with a wireless network card. If the operating system supports this card via drivers, the device can be integrated into a Ethernet Network with Support for 11 Mbit or 54Mbit (802.11 a/b/g). The specifications of this network topology has to be attended.
Page 45
Tablet PCs TT13 ONFIGURATION OF THE OUNTRY The default Installation of the WLAN driver, which is provided by Service-CD, installs the driver with the country code “United States”. The channels 1-11 are used. The country code can be changed later. The following chapter shows how to change the country code.
Tablet PCs TT13 Change to the tab Advanced. Choose the country in value to the desired country. 6.10 B LUETOOTH Note: Detailled Information with the keyword Bluetooth can be seen in Windows Help which is located in the path: Start Help & Support...
6.11 UMTS ( OPTIONAL The TT13 device is equipped with a mini PCI Express card of the Sierra Wireless MC8775V type. By using the UMTS card, audio and data signals can be transmitted. The following mobile radio network standards are supported by this card:...
Page 49
Tablet PCs TT13 Insert the SIM card in the SIM card drawer as shown in the picture. Push the SIM card drawer back into the device with the SIM card facing down. Connecting the headset A commercially available headset including microphone is required for proper communication.
Page 50
Tablet PCs TT13 3G W ATCHER The integrated 3G Watcher software controls the functions of the built-in Sierra Wireless MC8775V PCI Express Card. The following dialogue window will appear once the SIM card was inserted. Now enter the PIN code of your SIM card in the dialogue window and confirm by pushing Send.
Page 51
Tablet PCs TT13 By using the Language tab, a numeric pad is shown. Now you can enter a phone number by using the numeric pad. Click on the green handset icon in order to start the dialling process. The duration of the connection is displayed with an active connection.
Page 52
Tablet PCs TT13 UMTS NTERNET VIA The Internet can be used via the UMTS broadband network. The 3G Watcher software includes default WWAN providers, which are activated by creating a profile. Open the connection administration by using ToolsConnections Click on the following icon in order to create a new profile.
Page 53
Tablet PCs TT13 Confirm your selection first by pushing Save, and subsequently with OK. The profile of your WWAN provider is now enabled and will appear in the main menu of the 3G Watcher. Please select your provider from the pull down box. Subsequently click on Connect.
Page 55
Tablet PCs TT13 FUNCTION This software offers the opportunity of sending short messages (SMS). In order to use this feature, open SMS Express in the ToolsSMS Express menu. The main window opens now. By pushing New, you can now edit a short message (SMS) in an additional dialogue window.
Page 56
Tablet PCs TT13 Select To and add a contact from your phone directory or enter a phone number manually. As soon as your message was created, you'll click on the Send button. The message is now in the message Outbox and will be sent to the specified receiver.
This way, access rights of persons, e.g. with respect to a certain work area or job can be controlled. The Mifare technology is used in the TT13 device. The frequency used in this case is 13.56 MHz.
Page 58
The RFID reader can be controlled via the integrated "ads-tec RFID-Reader" software. The application communicates with the RFID reader of the TT13 device via the serial interface. This application is configured automatically, i.e. when the program is started, all COM ports are searched for the serial interface of the RFID reader.
Page 59
Tablet PCs TT13 Once the authentication succeeded, the serial numbers received will be output. If no RFID reader was located, a message is output. This application supports German and English as languages. You can change the language via the "Rfid.ini" file by entering either "LanguageId = DE" or "LanguageId = EN".
Tablet PCs TT13 6.13 C AMERA OPTIONAL The integrated camera gives the opportunity of recording photographic or video data. The camera has the following characteristics: Optical resolution: 1/3.2 inch Pixel size: 2.8 um Max. frame rate: 15fps @ UXGA Effective resolution:...
Page 61
Tablet PCs TT13 Start the Scanner and camera wizard by clicking on the camera icon. Confirm the message shown by clicking on Next. In the following dialogue window, a picture preview, which allows you to take a photo, will appear on the left-hand side. Once the camera has automatically focussed on the selected object, the photo can be created by pushing the Take photo button.
Note: The soft keyboard of the TT13 device can be delivered in 25 languages. Depending on the selected language, the soft keyboard representation and function may vary. Basic functions are identical in all languages. The following languages are available:...
Page 65
Tablet PCs TT13 UMERIC KEY PAD VIEW Switch to representation of the function-key bar Note: Continuing Information to the Softkeyboard can be taken from the Softkeyboard User Manual. UNCTION KEY BAR VIEW Note: If a function is to be activated, which requires pressing two keys at the same time (e.g.
USB interface. UNCTIONS The TT13 device must be switched on to open the drive. After pushing the Eject button, the drawer jumps open and must be pulled out completely. The CD/DVD is now placed with the opening on top of the centre piece and carefully pushed downwards until the disk holder snaps in.
Tablet PCs TT13 7.2 L ASER PRODUCT SAFETY This product has been designed and manufactured according to FDA regulations "title 21.CFR. chapter1, subchapter J. based on the Radiation Control for Health and Safety Act of 1968". This product is also classified as a class 1 laser product. There is no hazardous invisible laser radiation during operation, because invisible laser radiation emitted inside of this product is completely confined in the protective housings.
Tablet PCs TT13 7.4 B C4/TT13 ATTERY HARGING TATION Optionally there is the opportunity to charge the battery of the device by an battery charging station. The battery charging station features two battery slots. This allows you to charge two batteries parallely.
Page 70
Tablet PCs TT13 INSERTION OF THE BATTERIES The batteries need to be placed into the battery slots to get a connection between the pins of the battery charging station and the battery. Note: If the battery is placed correctly into the battery charging station a signal tune will sound and the charging process starts.
Page 71
Tablet PCs TT13 STATUS DISPLAY During operation, different system activities will be displayed. -LED EADY DIPLAY EHAVIOR DESCRIPTION No battery inserted static battery completely charged static battery is defective -LED D HARGE ISPLAY battery is not charging flashing battery is charging...
Tablet PCs TT13 7.5 S UBSTITUTION OWER UPPLY Optional a substitution power supply for operating the device is available. 7.6 C OWER UPPLY Optional a car power supply for the device is available. The device can be comfortably supplied with power in vehicles.
ECHANICAL OCKING DAPTER The available TT13 Docking offers in combination with the Table Stand -/ Wall bracket a stable mounting solution for every kind of location. Via the Docking-Connector on the backside, the device can be connected to a Docking- Station.
Page 75
Tablet PCs TT13 OUNTING THE EVICE TO THE OCKING 1) The Device needs to be placed on the red marked area behind the turquoise marked area. 2) The Device has to be pressed onto the Docking. The Device should engage perceptible.
7.9 T ABLE TAND The available TT13 Docking offers in combination with the Table Stand -/ Wall bracket a stable mounting solution for every kind of location. Mount the Docking via the supplied M5x30-8.8 SW Inbus screws to the Table Stand.
7.10 W RACKET The available TT13 Docking offers in combination with the Wall bracket a stable mounting solution for every kind of location. 1) The Wall Bracket needs to be mounted via VESA 75 or 100 to the installation site.
Tablet PCs TT13 7.12 3 P OINT Optional a 3 Point Cord for mobile Work is available. The 3 Point Cord can be mounted directly onto the device and makes the device to a mobile workstation. 3 x DZ-MECH-33255-0 3 x DZ-MECH-31033-0...
Page 79
Tablet PCs TT13 2) Mount the screws as shown in the picture to marked positions. Note: Tighten the screws with max. 120 Ncm. The Cords should be movable but without loosening the screws. OUNTED IEW FOR RIGHT HANDED OPERATION 3) The Cord can be added via the carabine intro the Cord guides. The Device is prepared for mobile operation.
Tablet PCs TT13 7.13 H TRAP Alternative to the 3 Point Cord, a Hand Strap for mobile work is available. The Hand-Strap can be mounted directly to the device and makes it to a mobile workstation. 2 x DZ-MECH-33255-0 1 x DZ-MECH-31045-0...
Tablet PCs TT13 7.14 ODU 10 RS232 A POL TO DAPTERCABLE The ODU 10pol. RS232 adapter cable enables the connection of the device via the RS232 interface of the connectable device. 7.15 P ROTECTION EZEL The optional available protection bezel offers protection against transport damage.
Tablet PCs TT13 ERTIFICATIONS 8.1 C ERTIFICATIONS TESTS The TT13 system has the following certifications: CE compatibility EN 61000-6-3:2007 Electromagnetive Emission, Klasse B EN 55022:2006 Electromagnetive Emission EN 61000-6-2:2005 Electromagnetive Emission EN55024:1998+A1:2001+A2:2003 Electromagnetive Emission UL/cUL201 USL/CNL E217133 GOST-R certificate Device complies with standard WLAN certificates for 802.11 a/b/g...
Tablet PCs TT13 8.2 E (EMC) LECTROMAGNETIC COMPATIBILITY Certificate of acceptance in accordance with the Federal Electromagnetic Compatibility Act in Germany ("EMVG") of 2007 (respectively the EMC Directive no. 2004/108/EC). In accordance with the Federal Electromagnetic Compatibility Act in Germany, this device is authorised to carry the EC conformity sign "CE".
Tablet PCs TT13 8.3 FCC A PPROVAL Note: This device complies with part 15 of the FCC Rules [and with RSS-210 of Industry Canada]. Operation is subject to the following two conditions: This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.
Tablet PCs TT13 10 S ERVICE AND UPPORT ads-tec and appointed partner companies offer you comprehensive maintenance and support services, ensuring quick and competent support should you have any questions or concerns with regard to ads-tec products and equipment. ads-tec products may also be provided and installed by partner companies. Such devices may have customised configurations.
Need help?
Do you have a question about the TT13 and is the answer not in the manual?
Questions and answers